| Edizione a cura di
- Prof. Ing. Carlo Cinquini,
Department of Structural Mechanics, University of Pavia &endash; Italy
- Prof. Ing. Marco Rovati, Department
of Mechanical and Structural Engineering, University of Trento &endash;
Italy
- Prof. Ing. Paolo Venini, Department
of Structural Mechanics, University of Pavia &endash; Italy
- Ing. Roberto Nascimbene, Department
of Structural Mechanics, University of Pavia &endash; Italy
TABLE OF CONTENTS
- On optimality conditions and
primal-dual methods for the detection of singular optima W. Achtziger
- An effective procedure for
toplogy optimization of continuum structures subjected to self-weight
loading R. Ansola, J. Canales and J. A. Tarrago
- Range zooming for genetic range
genetic algorithms M. Arakawa, T. Miyashita and H. Ishikawa.
- A mixed 0-1 programming problem
for damage detection in truss structures Y. Araki and Y. Miyagi.
- Multi-objective robust optimization:
concept and approach S. Gunawan and S. Azarm
- Use of Bayesian analysis and
decision theory to improve particle swarm optimization performance
V. Balabanov, R. Vitali, G. Venter and J. Sobieski
- On the application of Tabu
search to optimisation of hydrostatically loaded barrels J. Blachut
- High quality structural response
and sensitivity analysis in shape optimal design of shells N. Camprubi,
M. Bischoff, F. Koschnick and K. U. Bletzinger.
- On application of stochastic
optimization to reconstruction of spatial random microstructures B.
Bochenek and R. Pyrz.
- Analytical approach to optimization
of columns for post-buckling behaviour B. Bochenek and M. Zyczkowski
- Optimal design of smart structures
using adjoint method Z. Mroz and D. Bojczuk.
- Optimizing the composition
profile of thermoelastic functionally graded materials by using adjoint
equations: case of temperature-dependent materials properties D. Boussaa
and L. Jaballah.
- Evolutionary computation in
optimisation of 2-D structures M. Szczepanik and T. Burczynski.
- Optimization of Large-scale
Tall Buildings using hybrid genetic algorithms C. Chan, P. Liu and
K. Wong.
- Optimum strength estimation
formulae for ring stiffened tubular T-joints H. Cho, Y. Ryu and J.
Kim
- An adaptive decomposition and
scheduling of multidisciplinary design problems H. Park and D. Choi.
- Yoke topology optimization
of the bias magnetic system in a magnetostrictive sensor W. Kim and
Y. Y. Kim.
- Optimal design of structures
subject to multiple loadings G. Cocchetti
- Contribution to the optimization
of closed-loop multibody systems: application to parallel manipulators
J. F. Collard, P. Fisette and P. Duysinx
- Reliability and robustness
of optimized continuous caster submerged entry nozzle K. J. Craig
and G. J. de Wet.
- The design and the optimization
of fork-pin couplings in front motorbike suspension D. Croccolo, R.
Cuppini and L. Matrà
- Analysis and development of
a counter rotating disks braking system for a motorcycle application
D. Deutsch and D. Croccolo
- Optimum kinematic dimensional
synthesis of generic mechanisms using G.A. I. F. de Bustos, J. Aguirrebeitia,
V. Gomez-Garay and R. Aviles
- Identification of material
parameters using an optimization algorithm D. D. de la Cour.
- Optimal shape and configuration
optimization of multi-loaded structures with manufacturing tolerances
K. Dems and W. Gutkowski
- Problems in layout optimization
with finite-size features A. R. Diaz, S. Chellappa and M. P. Bendsoe
- Defining cooling strategies
of electronic systems using dedicated derivative-free optimization
L. Driessen, J. Parry, E. Stinstra and P. Stehouwer.
- Structural optimization in
assistance to materials selection N.S. Ermolaeva and P.V. Kandachar.
- Finite element-based optimum
reinforcement dimensioning of concrete plates and shells A. Tomas
and P. Marti
- On globally stable singular
topologies A. Evgrafov.
- Minimum cost design of ring-stiffened
cylindrical shells subject to axial compression and external pressure
K. Jarmai, J. Farkas and Z. Virag
- A multicriteria shape optimization
model for hip prosthesis design R. B. Ruben, J. Folgado and P. R.
Fernandes.
- Property optimization of vehicle
body structure elements using simplified models H. Fredricson.
- Topological design of water
retaining structures M. B. Fuchs and N. N. Y. Shemesh
- Optimization algorithms based
on sensitivity analysis for designing plate wing on supersonic flutter
H. Furuya and Y. Odaka.
- Component and system reliability
analysis using optimization technique G. Li and J. Meyer.
- Hybrid chaos optimization algorithms
for nonlinear functions D. Yang, G. Li and G. Cheng.
- Sensitivity analysis and optimization
of structures for unspecified joint and dynamic load parameters A.
Garstecki and Z. Pozorski.
- Optimum design of steel frames
with frequency constraints using wavelet neural networks M. R. Ghasemi,
E. Salajegheh and A. Ghorbani.
- An optimum safety factor approach
for reliability-based optimal design G. Kharmanda and N. Olhoff.
- Stochastic multi-objective
optimisation for the design of vehicle systems M. Gobbi and G. Mastinu.
- Comparison and application
of ant algorithm and other biological algorithm in structural optimization
Y. B. Gong , Q. Y. Li, W. Y. Li and D. G. Yang
- An integral approach to optimisation
in forming technology I. Gresovnik and T. Rodic
- On membrane elements with drilling
degrees of freedom in topology optimization C. S. Long, P. W. Loveday
and A. A.Groenwold.
- On constrained optimization
of structural systems using particle swarms D. N. Wilke and A. A.
Groenwold
- Selecting representative objective
functions: a case study using swarm intelligence A. A. Groenwold and
J. Farkas
- Remodeling simulation of bone
structures with optimization method Y. Gu, B. Chen and Z. Lian.
- Vibration control of piezoelectric
truss structure by optimization method Y. Gu and G. Zhao
- A Nash game approach for multidisciplinary
topology design A. Habbal, J. Petersson and M. Thellner
- Identification of material
properties for lead-free solder using micro-indentation experiments,
FE simulation and optimization H. Hamasaki, F. Yoshida, K. Shinbata
and V.V. Toropov.
- Application of structure optimization
technique to aluminium beverage bottle design J. Han, R. Itoh, T.
Hanafusa and S. Nishiyama
- The computation of optimized
proposals for cast parts taking into account manufacturing constraints
L. Harzheim
- Decision support system for
aesthetic design of bridges using advanced immune algorithm and ID3
H. Furuta, Y. Hayashi, T. Iida, N. Kajimura and K. Tateshi.
- Optimization of plastic strain-hardening
plates of piece-wise constant thickness H. Hein
- Use of response surface methods
to aid understanding and visualization in aircraft design C. M. E.
Holden and A. J. Keane
- Long-Distance, gradient based
identification of corrosion through analysis of piezo-generated impulse
transmission J. Holnicki-Szule, P. Kolakowski, A. Orlowska, A. Swiercz,
D. Wiacek and T.G. Zielinski
- Identification of leakages
in water networks-virtual distortion method approach J. Holnicki-Szulc,
P. Kolakowski and N. Nasher
- Optimal strategies of adaptive
impact absorption J. Holnicki-Szulc, P. Pawlowski and M. Wiklo
- A cross-sectional shape initial
design method for automotive frame structures using genetic algorithms
M. Yoshimura, S. Nishiwaki and K. Izui.
- Remeshing-free shape optimization
using the wavelet-Galerkin method and applications to MEMS actuator
design G. Jang, Y.Y. Kim and K. K. Choi.
- Optimum design of spatial trusses
using hybrid formulation of the problem S. Jendo, W.M. Paczkowski
and A. Silicki
- Topology optimization of two-dimensional
waveguides J.S. Jensen and O. Sigmund.
- Robust design optimization
of structures with thermal stress using perturbation-based stochastic
finite element method Z. Kang, I. Doltsinis, G. Cheng and Y. Gu
- Second-order cone programming
for contact analysis of cable networks Y. Kanno and M. Ohsaki
- Articulated mechanism design-introduction
of DOF constraint A. Kawamoto, M. P. Bendsoe and O. Sigmund.
- Stacking sequence optimization
of composite structures in a fuzzy environment P. Kedziora
- Efficient reliability-based
design optimization for dynamic structures G. Kharmanda, A. Mohsine
and A. El-Hami.
- Parametric study for response
surface modeling using MLSM and sensitivity C. Kim, S. Wang and K.
K. Choi
- Genetic algorithm in the multiresolution
multiscale setting Y. Y. Kim, J. D. Hoon and D. S. Kim.
- Efficient eigenproblem reanalysis
of structures U. Kirsch and M. Bogomolni
- Multi-criteria shape optimization
of a wind head for the cooling process of a panel in CRT using kriging
metamodel K. Lee, K. S. Lee, Y. C. Lim and S. H. Kim
- Free material optimization
with vibration and stability constraints M. Kocvara and M. Stingl.
- An empirical local convergence
study of alternative coordination schemes in analytical target cascading
N. Tzevelekos, M. Kokkolaras, P.Y. Papalambros, M. F. Hulshof, L.
F. P. Etman and J. E. Rooda
- Computational geometry and
design of "intelligent" structures A.G. Kolpakov
- Optimal design of annular plates
against buckling under loadings controlled by displacements J. Kruzelecki
and P. Smas.
- Optimal design of shells against
buckling under overall bending with shearing force taken into account
M. Barski and J. Kruzelecki.
- Parallel hybrid genetic algorithms
for structural optimization of large-scale structures on a high performance
computing system Y. Kwon and H. S. Park
- Tabu search method for structural
design in a discrete design space K.-H. Lee, S.-H. Baek and W.-S.
Joo
- Topology optimization of rubbers
in the vibration isolators W.-S. Lee and S.-K. Youn
- Methods for generating perturbation
vectors for topography optimization of structures J. P. Leiva
- Optimization of stepped conical
shells J. Lellep and E. Puman
- Topology optimization of shells
and surface Michell structures S. Czarnecki, G. Dzierzanowski, T.
Lewinski and J.J. Telega.
- Two-phase topology optimization
of plates and three-dimensionals bodies S. Czarnecki, G. Dzierzanowski
and T. Lewinski.
- An elementary proof of the
Michell sphere being the lightest among all the uniformly stressed
shell loaded by two opposite torques T. Lewinski.
- Robust airfoil optimization
in high resolution design space W. Li and S. L. Padula.
- Optimum design of the bracket
for satellite antenna O-K. Lim, W.-S. Yoo, K.-S. Hong and J.-O. Lee.
- Material microstructure design
for dynamic stiffness using topology optimization approach C.Y. Lin,
S.J. Hollister and N. Kikuchi
- Shape and tailoring optimization
of an aircraft air intake ramp by genetic algorithm G. Caligiana,
F. Cesari and A. Liverani
- Limit analysis and optimal
design of structures made of nonlinear softening material J. Logo
and A. Vasarhelyi
- A unified model for the elasto-plastic
optimal design of structures subjected to multiparameter loads and
impact S. Kaliszky and J. Logo
- Analysis and design sensitivity
analysis of time dependent fluid-structure interaction problems using
mortar methods L.A. Jakobsen, E. Lund and H. Moller.
- Some analytical and numerical
results in a class of optimization problems G. Machado and L. Trabucho
- Chromosome repairing in genetic
methods for multi-objective topology optimization of structures with
equality constraint on volume J. A. Madeira, H. Rodrigues and H. Pina
- Two-point mid-range approximation
enhanced recursive quadratic programming method G. Magazinovic
- Computational tricks for efficient
design sensitivity analysis of coupled nonlinear problems H. Moller
and E. Lund.
- Gradient optimization applied
to the identification of mechanical and piezoelectric properties of
active plate structures A.L. Araujo, C.M. Mota Soares, J. Herskovits
and P. Pedersen.
- Application of thermographic
methods in identification of structure properties Z. Mroz and K. Dems.
- Application of stochastic processes
and Markov chains in shape and material optimisation problems of composite
structures A. Muc
- Optimal design of resin transfer
moulding process A. Muc and P. Saj
- Optimal stacking sequences
for laminated compressed structures with delamination A. Muc and W.
Gurba
- Optimal design of reinforced
concrete plates by simulated annealing I. Mura
- Shape optimization of thermoviscoelastic
contact problems by level set method A. Myslinski
- Design of piezoelectric plate
and shell actuators using topology optimization M. Kogl, E. C. N.
Silva and M. L. Bucalem
- Structural topology optimization
of vibrating structures with specified eigen-frequencies and eigen-modes
Y. Maeda, S. Nishiwaki, K. Izui, M. Yoshimura, K. Matsui and K. Terada
- Sensitivity analysis of optimized
structures with Hill-Top branching M. Ohsaki
- Topological design optimization
of 2D and 3D continuum structures with design-dependent surface loading
J. Du and N. Olhoff
- Parallel evolutionary algorithms
for design optimization S. Krenich and A. Osyczka
- Computational procedures for
plastic shakedown design of structures F. Giambanco, L. Palizzolo
and A. Caffarelli.
- Shape optimization under static
loads transformed from dynamic loads K.-J. Park, J.-N. Lee and G.-J.
Park
- On eigenfrequency optimization
of plates with a hole N. L. Pedersen
- Comparison of support and layout
optimization methods V. Pomezanski and A. Vasarhelyi.
- New formulation of a minimum-bias
experimental design based on a Gauss quadrature X. Qu, R. T. Haftka
and G. Venter.
- Topology optimisation using
genetic programming method Q. Z. Zheng, O. M. Querin, D. C. Barton
and R. N. Brodie
- Optimising topologies through
a multi-GA system S. Y. Woon, L. Tong, O.M. Querin and G. P. Steven
- AnyBody - a software system
for ergonomic optimization J. Rasmussen, M. damsgaard, E. Surma, S.T.
Christensen, M. de Zee and V. Vondrak.
- Response surface models for
design of composite stiffened shells R. Rikards and J. Auzins.
- Identification of structural
matrices and model optimization P. Rosko
- On coaxiality of stress and
strain fields and stationarity of elastic energy in anisotropic solids
M. Rovati and A. Taliercio.
- A practical design optimization
procedure for box girder sections of continuous bridges Y.-S. Ryu,
J.-H. Kim, H.-M. Cho and J.-T. Kim.
- An improved reliability analysis
using design of experiments and an application to tolerance design
H. S. Seo, B. M. Kwak, S. H. Lee and J. H. Chang.
- Extended functions for the
consideration of uncertainties in the definition of structural optimization
problems A. Schumacher
- A parallel particle swarm optimizer
J. F. Schutte, B. J. Fregly, R.T. Haftka and A. George
- Shape optimization of a truck
aluminum wheel in integrated CAD7FEM environment G. Kortelyesi, C.
E. Selley and F. Szemenyei.
- On optimal geometrically non-linear
trusses S. V. Selyugin.
- Sensitivity analysis and optimal
design of geometrically nonlinear 3D frames with stress and buckling
constraints O. Sergeyev and V. Kiselev
- Robust optimal design formulation
using gradient index and its application to MEMS structures J.S. Han
and B.M. Kwak.
- A freeform morphing scheme
for direct shape optimization of arbitrary polygonal meshes J. Shen,
B. Maxim and K. Akingbehin.
- Development of optimal design
markup language and its application to a CAD-based total optimal design
system J. H. Shin and B. M. Kwak
- Optimal design of water jet
nozzles utilizing independence Design axiom H. Shin and J. Lee.
- A role reinforcement learning
technique in intelligent optimization problems H. Jeong and J. Lee.
- Robust design optimization
of extrusion slit die design using several multi-objective optimization
methods S. L. Bates, J. Sienz and J. F. Pittman.
- Optimization strategies for
the optimization of PVC extrusion dies H.J. Ettinger, J. Sienz and
J. F. T. Pittman.
- Design of acoustic devices
by topology optimization O. Sigmund and J.S. Jensen
- A conjugate gradient implementation
for the economical solution of constrained optimization problems with
severe noise in the objective function J.A. Snyman
- Topology and sensitivity -
based optimization of stiffened plates and shells I. Marczewska, W.
Sosnowski, A. Marczewski and T. Bednarek.
- Discrete fiber angle optimization
of general shell structure using a multi-phase material analogy J.
Stegmann and E. Lund.
- Collaborative tube design optimization:
an integral meta-modeling approach E. Stinstra, P. Stehouwer and J.
Van der Heijden.
- A branch-and-cut method for
global optimization of minimum weight truss topology problems with
stress, displacement, and local buckling constraints M. Stolpe.
- Design optimization in rotordynamics
with eigenvalue constraints F. Strauss, J. Starke and M. Inagaki.
- Displacement based multilevel
structural optimization and high performance computing B.A. Houshmand,
H.J. Neeman and A.G. Striz.
- Optimum control with multi-objective
for intelligent truss structures Y.K. Sui and L.C. Long.
- Stress-constrained truss topology
problems that can be formulated and solved as linear or convex optimization
problems K. Svanberg.
- Simultaneous optimum design
of structural and control systems with consideration of location of
sensor/actuator Y. tada and J. Yamazaki
- Structural topology optimization
using genetic algorithm with a morphological encoding of design geometry
J. Prasad and K. Tai
- Maximum critical velocity design
of adaptive panel exposed to fluid flow M. Tanaka, M. Todoh and T.
Maetaka.
- Topology optimization with
regard to temperature dependent material properties optimization -
structural optimization based on bionic principles K. Thielemann,
M. Maier, H.-G- Herrmann and P. Steibler.
- Evaluation of decomposition
methodology for multidisciplinary optimization C. Tribes and J.-Y.
Trepanier
- Optimal design of rotationally
symmetric shells for buckling under complex loadings P. Trzeciak
- Using LDL decomposition for
eigenvalue constraint T. Turkkila
- Robust design using particle
swarm and genetic algorithm optimization G. Venter, R.T. haftka and
J. S. Sobieski
- Design of composite laminates
as an optimization problem: a new genetic algorithm approach based
upon tensor polar invariants A. Vincenti, P. Vannucci and G. Verchery.
- A multi-phase level set model
for multi-material structural optimization M.Y. Wang and X. Wang.
- New approach for improving
the dynamic behaviour of components through topology optimization
- structural optimization based on bionic principles J. Weiss, M.
Maier, H.-G.Herrmann and P. Steibler.
- Topology eigenvalue optimization
using the wavelet-based multiscale Galerkin method Y.-S. Yi and Y.Y.
Kim.
- Minimum feature size control
scheme in topology optimization: application to MEMS designs G. H.
Yoon and Y.Y. Kim
- Breakthrough of design solutions
enabled by extraction of core factors in product design optimization
M. Yoshimuro, K. Izui, S. Komori and S. Nishiwaki.
- The particle swarm optimization
algorithm and its application in multidisciplinary design optimization
H. Yu and Z. Zhaoying.
- Limitations of the gradient
projection method in Pareto optimum sensitivity analysis W.H. Zhang,
Y.C. Deng and D. Wang
- Optimization of flexible multibody
dynamic systems using equivalent static load method B. S. Kang and
G. J. Park.
- Nonlinear design of trusses
under multiple load cases using cellular automata S. Missoum, M. Abdalla
and Z. Gurdal.
- Topology optimization for variable
external forces of nonzero cost G. I. N. Rozvany, J. Logo and S. Kaliszky.
- Global optimization for structural
design by general random tunneling algorithm S. Kitayama and K. Yamazaki
- Optimum design of lateral braces
of columns under buckling constraints considering critical imperfection
J. Takagi and M. Ohsaki
- Shape optimization of a bow
M. Pagitz and K.-U. Bletzinger
- Sail optimization for maximal
speed design C. Cinquini, A. Gobetti and R. Nascimbene
- ELAnO - Development and design
of Innovative lightweight structures applying adapted analysis and
optimization methods J. Sauter, K.-U. Bletzinger and F. Daoud
- Optimal shape design of an
electrostatically actuated micro-beam includng geometric non-linearity
against pull-in instability M.M. Abdalla, C.K. Reddy, W.F. Faris and
Z. Gurdal
- On a maximization (worst scenario)
problem for viscoelastic long memory structures I. Bock
- Optimal location of nonlinear
support using topology optimization S. Wang, S. Ki and H. Moon.
- Sensitivity analysis of multipliers
and regions of parametric resonance A.P. Seyranian
- Optimal automatic design of
crank-shafts L. Bertini, S. Barone and A. Curcio.
- Recent advances in the application
of topology optimization in design U. Schramm.
- Optimization of vibrating column
with periodic cross-section and on various foundation A. Gajewski
and Z. Piekarski.
- An optimized approach for the
design of microfabricated compliant mechanisms F. deBona and M. Munteanu.
- The optimal shape of complex
bodies: influence of the modeling of material substructure P.M. Mariano
and P. Venini
- Optimization of L-shaped laminated
plates via motar spectral method C. Cinquini, C. Mariani and C. Masanta
- Sparse point interpolation
in application to the functional adaptation of bone J. Piekarski
- Kriging response surfaces as
an alternative implementation of reliability based design optimization
C. A. Pretorius, K. J. Craig and L. J. Haarhoff
- Durability of prosthesis in
osteoporotic bone - an optimal response approach T. Lekszycki and
P. Maldyk
- Optimal shape design of implants
under bone remodeling conditions T. Lekszycki and J. Piekarski
- Minimization of mistuned rotor
response through an evolutionary algorithm J. M. Brown, B. K. Beachkofski
and R. V. Grandhi.
- Different approaches to deal
with bounded-but-unknown uncertainty-based design optimization: application
to MEMS S. P. Gurav, M. Langelaar, J. F. L. Goosen and F. van Keulen
- Topology optimization with
linear buckling responses - software and applications M. Zhou, N.
Pagaldipti and Y. K. Shyy
- Efficient product portfolio
reduction R. Fellini, M. Kokkolaras and P. Papalambros
- Response surface method applied
to practical response functions in structural optimization K. Vervenne,
R. T. Haftka and F. van Keulen.
- Identification of elastic constants
of micropolar solids using an optimization approach J. Fatemi and
F. van Keulen.
- An examination of immune algorithm
for structural and production design T. Miyashita.
- Errors in optimization using
response surface method and resulting physical phenomena H. Yamakawa,
T. Sugisawa and T. Miyashita
- Identification of elastoplastic
model parameters in large deformation problems using GBMMA methods
P.-P. Jeunechamps, J. Walmang, E.Delhez, P. Duysinx, A.-M. Habraken,
J.-P. Ponthot and P.Tossings.
- Optimization of acoustic sensitivity
of fiber lasers' optical frequency by package design L. V. Hansen.
- Performance of the FSD in shape
and topology optimization of two-dimensional structures using continuous
and truss-like models C. G. Provatidis and D. T. Venetsanos.
- Size optimization of two-dimensional
T-shaped frames using a virtual energy method P. A. Makris, C. G.
Provatidis, D. A. Rellakis and D. T. Venetsanos
- Minimization of probabilistic
analysis confidence interval through a novel experimental design process
B. K. Beachkofski and R.V. Grandhi
- FAIPA_MDO: A mathematical programming
algorithm for multidisciplinary design optimization J. Herskovits
, P. Mappa and C. M. Mota Soares
- Multidisciplinary in the optimization
of machine elements F.J. Szabo
- Optimum design of the lead
profile in the helical gears for the noise reduction using a response
surface method C.I. Park
- Minimum compliance density
based topology optimization of structures S. Liu, H. jia and D. Wang
- Buckling optimization of cylindrical
shells with porous material core S. Liu, X. Chen and X. Cao
- Sequential approximate programming
approach for reliability-based structural optimization G. Cheng and
L. Xu
- Combined design, orientation
and shape for stiffness and/or strength with orthotropic materials
P. Pedersen
- Optimization of structures
under fracture mechanics constraints using probabilistic approaches
N.V. Banichuk, F. Ragnedda, M. Serra and P. Venini
- Minimum cost of reinforced
concrete building grillages by simulated annealing M. Kripka.
- Continuum-based topology design
optimization using reproducing kernel method S. Cho and J. Kwak.
- Reliability-based robust topology
design optimization of nonlinear structures H.-S. Jung, S. Cho and
Y.-S. Yang
- Efficient evaluation approaches
for probabilistic constraints in reliability-based design optimization
B. D. Youn, K. K. Choi and R.-J. Yang.
- Design sensitivity analysis
of nonlinear shell structures K.K. Choi, K. Yi and N.H. Kim
- Reliability-based design optimization
of structural durability under manufacturing tolerances K. K. Choi
and B. D. Youn.
- Optimisation of rubber to metal
devices design using an innovative approach in elastomers modelling
D. Vetturi and A. Magalini
- Optimization of railway wheel
profile using multipoint approximation method I.Y. Shevtsov, V. L.
Markine and C. Esveld
- Topology optimization of transient
2D-frames for conceptual crashworthiness design C.B.W. Pedersen.
- Design and optimizationof helicopter
skid landing gears with multi-body analyses A. Airoldi and L. Lazzi
- A new formulation of the truss
topology optimization with local buckling constraints Y. Wang, L.
Huang and G. Sun.
- Meshfree method for shape optimization
of cooling fins: shape dependence on conductivity parameters F. Bobaru
and S. Rachakonda.
- Treating the problem of non-assembly
for dimensional synthesis of spatial mechanism O.F. Jensen and J.M.
Hansen.
- A grid-based problem solving
environment that uses the Master/Worker paradigm to parallelize DoE/RSM/Data
fusion search computations A.D. Scurr, A. J. Keane, S. Leary, A. Sobester
and A. Gould.
- Optimum blank design for sheet
metal forming process using high- and low-fidelity models R. Hino,
F. Yoshida and V.V. Toropov
- Adaptive shape optimization
of structure using genetic algorithms A. Dutta.
- Post-optimality approximation
based on kriging method H. J. Cao and B.Y. Duan
- On dynamic optimization of
the deployable large flexible net antenna used for satellite Y. Luo
and B.Y. Duan.
- Large scale multiobjective
optimization of rigidified inflatable structures using physical programming
A. Messac, S. Van Dessel, A. A. Mullur and A. Maria.
- Reliability based optimization
of disc spring using DOE and micro genetic algorithm T. Kim and J.
Lee.
- Optimizing the optimized: weight
reduction of an F1 car composite components L.F. Alvarez, R. Jones,
M. Gambling, C. Reynolds and V.V. Toropov.
|
